A warm home,lowerenergy bills.

Boards from 10 to 500 mm, cut in 1 mm steps to fit your project.

Stacks of white and graphite EPS boards with the amber BaltEPS strap, the top board lifted — White and graphite EPSOne material. Your size.

10 to 500 mmThickness for your project 1 mm cutting stepPrecision in every board Complex shapesCustom CNC parts

Boards by application

Floor
Foundation
Facade
- EPS 60 Facade
- EPS 60 Silver Facade
Wall
- EPS 60
- EPS 60 Silver
Roof

Grades and properties

Full catalogue

The table shows standard thicknesses. Every grade is also cut to your thickness, 10 to 500 mm.

EPS 60General purpose board for walls and roofs with low loads.λD 0.039 W/mK≥ 60 kPa25–150 mm
EPS 60 FacadeAged, dimensionally stable board for rendered facades.λD 0.039 W/mK≥ 60 kPa50–200 mm
EPS 60 SilverGraphite board: the same thermal performance with a thinner layer.λD 0.032 W/mK≥ 60 kPa50–150 mm
EPS 60 Silver FacadeGraphite facade board: the same thermal performance with a thinner layer.λD 0.032 W/mK≥ 60 kPa50–200 mm
EPS 80Floors and flat roofs with moderate loads.λD 0.038 W/mK≥ 80 kPa25–150 mm
EPS 100Strong board for loaded floors and slab foundations.λD 0.037 W/mK≥ 100 kPa25–150 mm
EPS 100 SilverEPS 100 strength with better thermal performance.λD 0.031 W/mK≥ 100 kPa25–150 mm
EPS 120 PerimeterLow water absorption board for structures in contact with soil.λD 0.035 W/mK≥ 120 kPa50–150 mm
EPS 150Heavily loaded floors and industrial buildings.λD 0.034 W/mK≥ 150 kPa50–150 mm
EPS 200Our strongest board. L-blocks are made from it too.λD 0.033 W/mK≥ 200 kPa50–150 mm
L-blockReady-made edge element for insulated slab foundations, made of EPS 200.≥ 200 kPaH 300 / 400 / 500 mm

Grade	Use	λD, W/mK	Strength, kPa	Thicknesses, mm
EPS 60 General purpose board for walls and roofs with low loads.	Wall, Roof	0.039	≥ 60	25–150
EPS 60 Facade Aged, dimensionally stable board for rendered facades.	Facade	0.039	≥ 60	50–200
EPS 60 Silver Graphite board: the same thermal performance with a thinner layer.	Wall, Roof	0.032	≥ 60	50–150
EPS 60 Silver Facade Graphite facade board: the same thermal performance with a thinner layer.	Facade	0.032	≥ 60	50–200
EPS 80 Floors and flat roofs with moderate loads.	Floor, Roof	0.038	≥ 80	25–150
EPS 100 Strong board for loaded floors and slab foundations.	Floor, Foundation, Roof	0.037	≥ 100	25–150
EPS 100 Silver EPS 100 strength with better thermal performance.	Floor, Roof	0.031	≥ 100	25–150
EPS 120 Perimeter Low water absorption board for structures in contact with soil.	Foundation	0.035	≥ 120	50–150
EPS 150 Heavily loaded floors and industrial buildings.	Floor, Foundation	0.034	≥ 150	50–150
EPS 200 Our strongest board. L-blocks are made from it too.	Floor, Foundation	0.033	≥ 200	50–150
L-block Ready-made edge element for insulated slab foundations, made of EPS 200.	Foundation		≥ 200	H 300 / 400 / 500

Thickness from 10 to 500 mm

Boards are cut from the block. Standard thicknesses are in stock; any other thickness is cut to order, to the millimetre.

Board thickness150mm

Board 1200 × 1000 mm, 4 boards per pack.

Pick a grade for 150 mm

CNC-cut foam shapes

Our CNC machine cuts cornices, roof and eaves details, arches, decoration and formwork from large EPS blocks to your drawing. From one piece to a full series.